ITE Power Adapter UEL060LCP-SPA
Home ite-external-power-adapter ITE Power Adapter UEL060LCP-SPA ITE Power Adapter UEL060LCP-SPA 48V 60W LED Driver Power Supply External Switching Wall Mount Power Adapter Wide range of
24 W
85~ 264 Vac input
9 ~ 24 Vdc output options
-5°C to +40°C temperature range
No-load power consumption < 0.1W
Energy efficiency level VI
Applications：Volp Phone, Surveillance Cameras, Small 5G Devices, Smart Home Controllers, LED Strips or Controllers, POS Terminals
The UES24A1-SPA series is a 24W AC-DC desktop ITE external power supply designed to deliver stable 12V output for a wide range of low-to-medium power electronic equipment. Built with a compact form factor and a distinct structural design, this series focuses on practical deployment where space efficiency, reliability, and regulatory compliance are required as baseline conditions rather than selling points.
Providing a regulated 12V/2A output, the UES24A1-SPA supports a broad 85–264VAC input range, allowing it to operate reliably across different regions and grid conditions without additional configuration. It complies with Energy Efficiency Level VI requirements and integrates essential protections against short circuit, overcurrent, and overvoltage, reducing downstream system risk and helping maintain stable long-term operation in continuous-use scenarios.
In real application environments, this power supply is commonly used in VoIP phones, surveillance cameras, small 5G devices, smart home controllers, LED strips or controllers, and POS terminals. It is positioned as a straightforward, dependable power solution for ITE equipment where consistency, safety margin, and cost-performance balance matter more than unnecessary complexity.
Safety Standards – J62368
Safety Approvals – PSE
| Model Number | Power(W) | Input Voltage Range(VDC) | Output Voltage(VDC) | Output Current(A) | Operating Temperature Range(℃) | Efficiency Standards |
|---|---|---|---|---|---|---|
| UES24A1-SPA | 24.0 | 85-264 | 12.0 | 0.01-2.00 | -5~+40 | PSE |
UES24A1-SPA series is a 24W ITE desktop power adapter for VoIP phones, surveillance cameras, small 5G devices, smart home controllers, LED strips and controllers, POS terminals, and other low-to-medium power indoor ITE equipment requiring stable regulated 12V output and long-term reliable operation.
It supports any 12V device that draws up to 2A — including routers, cameras, LED strips, audio devices, and embedded controllers.
Only if the total combined load does not exceed 24W and each device operates at 12V. A proper splitter with current protection is recommended.
Yes. This adapter provides a regulated 12V DC output with low ripple and stable performance for sensitive electronics.
Absolutely. It features over-voltage protection (OVP), short-circuit protection (SCP), over-current protection (OCP), and over-temperature protection (OTP).
Yes. It supports a wide AC input range (100–240V, 50/60Hz), making it suitable for worldwide use with the correct plug type.
The most common connector is a 5.5mm x 2.1mm DC barrel plug, but other types can be provided depending on your device requirements.
Yes. It complies with certifications such as UL, CE, FCC, RoHS, and energy efficiency standards like DOE Level VI or ErP.
No. It is not a battery charger. It can be used with a charging circuit but does not provide CC/CV charging required for battery protection.
Yes. As long as it operates within rated voltage and current limits, it can run continuously for applications like security systems or signage.
ITE stands for Information Technology Equipment. This means the adapter is certified for use with IT and office devices like networking gear and embedded systems.
Home ite-external-power-adapter ITE Power Adapter UEL060LCP-SPA ITE Power Adapter UEL060LCP-SPA 48V 60W LED Driver Power Supply External Switching Wall Mount Power Adapter Wide range of
Home ITE External Power Adapter ITE Adapter UE020LCP/UE020LCP1 LED Driver Power Supply 20W Wall Plug External Switching Power Supply Wide range of AC input voltage
Home ite-external-power-adapter ITE Adapter UES150B-SPAC ITE Adapter UES150B-SPAC 150w 54v Power supply for automation equipment AC input voltage 170- 264VAC Short circuit protection, overcurrent protection,
In the process of AC-DC power supply, smaller and higher power density development, the thermal design becomes a cord problem affecting the product’s reliability and
In the factory of Quankang,we introduced an Automated AI-SMT production line,and this blog will tell you how this line improves power adapter manufacturing consistency. What
Introduction Modern society is inseparable from communication and networking technologies. Every phone call, every email, every cloud transaction, and every IoT connection relies on an
Portable projectors have become essential tools for presentations, home entertainment, and educational purposes, offering flexibility and convenience in a compact form. However, power issues can
An ITE (Information Technology Equipment) Power Adapter is a power supply specifically designed to convert AC (alternating current) to the DC (direct current) required by
At Quankang, we bring over 30 years of R&D expertise to the design and manufacturing of power supply solutions. Our product range spans AC-DC adapters
For additional assistance, please complete the form below, and an associate will be in touch with your shortly.
